FLEXTAIL - MAX Sup Pump Lite

Low weight

MAX Sup Pump Lite (without battery) weighs only 1.2 kg.

Power supply via 12 V DC car cable.

MAX SUP PUMP (with battery) weighs 1.7 kg including the 9600 mAh battery, so you can forget the hassle of tangled cables.

Battery power or 12 V DC car cable. Recharge the battery via USB-C.

6 minutes to inflate the paddleboard

The pump reaches a pressure of 8.5 kPa in just 73 sec. at a maximum flow of 360 l/min. It saves you time in the first inflation phase. During the second phase, it increases the pressure from 8.5 kPa up to the desired pressure at a speed of 90 l/min.

Say goodbye to the drudgery of manual pumping! The pump inflates your paddleboard to 13 psi (10.3" x 32" x 6") in just 6 min.

3 working modes

The pump has three working modes (SUP/KITE/MAT) depending on the desired pressure of the inflated object. Easily select the desired target pressure with a single click. In addition, you have the option to manually adjust the pressure according to your specific needs.

MAX SUP Pump (with battery) inflates on a single charge

• SUP mode = 6 x paddleboard
• KITE mode = 10 x kite
• MATS mode = 18 x Sleeping Pad

However, it always depends on the required pressure and volume of the inflated object.

Patented cooling system

The patented internal design prevents your pump from overheating and ensures high performance and long life.

Digital display and automatic shut-off

With the digital display, you can preset the desired mode or target pressure and monitor the pressure rise in real time. The digital sensor has an accuracy of 0.1 psi. You can switch pressure units between psi and Barr.

You don't have to worry about exceeding the desired pressure. When it is reached, the pump will shut itself off. The last preset pressure is stored in memory for future use.